No hiding, no not replying, revise again! Damn! Absolutely real! Free internet access on mobile!

WiFi~~or install a router at home and search it on your mobile phone and it will be ok*^_^*Don't spray! ah! Who throws slippers! ************** I'm kidding, impatient gays can't eat sweets. This method has not been tried nationwide, so don't blame Gufen if it doesn't work! Start the tutorial!
Now I will reveal to you a method on how to activate a stopped card! ?After activation, you can surf the Internet for free. First, prepare a card that has been suspended due to arrears. Key points to note: "1. You need to know the card password. 2. The card has not been canceled. 3. The downtime should not exceed three months. If the above is OK, you can start playing karaoke! Step 1: Log in to the China Mobile online business hall and change the mobile phone card password to 949389, which means the initial code of China Mobile. This is to extend the system search time and bring convenience to actions. Step 2: Report the loss of the mobile phone card, dial 13800138000 and follow the system voice operation, enter the card number, enter the password 949389 and the system will prompt that the loss report is successful. Step 3: Use another card and send QXGS#number#password to 13800138000 to cancel the loss report operation. At this time, the shutdown card is activated, and you can surf the Internet for five days, turning waste into treasure!Remember: "You can't make phone calls or send text messages, and you don't need to do anything for free, otherwise the system will detect it and the system will still shut down." Five days later you repeat this operation and it can be used again. I hope all my friends can use unlimited cards, because China Mobile has made us too much money! It's time to share some with us! Right! [I despise people who read posts but don't reply to them] I hope everyone will support me. Although this method is very good, it is a bit troublesome. Finally add a few words... Press **21*999999# in standby and then press to make a call... Successfully pulled... Call forwarding is turned on... Now when someone calls you, it will say that the number you dialed is unavailable... or there is no response... Try it quickly... Haha... If you try it, you have to come back and call me... Press ##21# to cancel, okay!You can use your mobile phone to access the Internet through your computer and share your computer's broadband. Preparation work: 1. Hardware: 1. A computer connected to a broadband connection (desktops and laptops are acceptable) 2. Bluetooth adapter (you need to buy Bluetooth 2.0, which has fast transmission speed) 2. Software: 1. gnubox (mobile phone software, by yourself) Signed or cracked)
http://www.kanway.com.cn/cn/gnubox_s60v3.rar
2.mrouter (PC software)
http://www.kanway.com.cn/cn/mRouter3.1.0.9 Installer.exe
3. Bluetooth driver (I use Widcomm 5.0.1.801 cracked version)
http://download.tompda.com/soft/symbianos/%ba%ec%cd%e2%c0%b6%d1%c0/%d7%ee%d0%c2%c0%b6%d1%c0%c7%fd%b6%afwidcomm5.0 .1.801%c6%c6%bd%e2%b0%e6.rar
gnubox file prompts "cannot be installed, restricted by certificate" when installing (self-sign first, if not, then read below)
Some people always report that when downloading and installing S60v3 software, it prompts that the certificate has expired and cannot be installed. In fact, this is not considered at all. ,
This happens because the date when you installed the software has exceeded the validity period of the certificate when the software author modified and created the software.
The solution is very simple, just adjust the phone time to the validity period of the certificate used by the author when creating the software and you can install it normally.
Specific method:
1. During installation, select ViewThe certificate is detailed, including the certificate expiration date, click here to adjust.
2. Adjust the phone time forward in 2-month increments until you find a suitable time to install the software.
Note: Do not adjust the time span too large, because no matter whether the time is before or after the certificate validity period, you will be prompted that the certificate has!
Finally install the software and then adjust the time to normal
3. Some files can also be self-signed to solve the problem of expiration Specific setup work
First, let's set up the computer side:
1. Install the Bluetooth driver Widcomm. Use the Bluetooth driver downloaded above. There is no difficulty in installation here, just go to NEXT. Note: The Bluetooth adapter must be plugged into the USB port during installation, otherwise it cannot be installed.
2. Set up Widcomm. First turn on the Bluetooth of Xiao6. Then right-click the Bluetooth logo that appears in the lower right corner, and then click "Add Bluetooth Device". Then Widcomm will search for surrounding Bluetooth devices. The model of your phone (the Bluetooth name is of course the name you set, it may not be 6120C, unless you have kept it from the default and has not changed it) will appear in the dialog box. Click on the icon of your phone, click Next, enter a password casually, click "Pair Now", then enter the same password on the phone, and the pairing is successful.Then right-click the Bluetooth logo, enter Widcomm's "Advanced Settings", click the "Local Service" tab, and write down the port number of the bluetooth serial port below (for example, mine is COM6). If there is no bluetooth serial port, then you click Add Serial Service below and write down the port number. At this point, the Widcomm setting is over.
3. Establish a modem connection. Open the "Control Panel", click the "Phone and Modem" option, and add a new modem. Note that you must check "Don't detect my modem, I will choose it from a list", then select "Standard debug modem type" on the left in the pop-up dialog box, select "Communication cable between two computers" on the right, and then next step, OK. Then double-click the "communication cable between two computers" just added in the modem list, click the "Modem" option, set the maximum port speed to the maximum, which is 115200, and finally confirm.
4. Install mrouter3. Install the downloaded mrouter3. After installation, run the software, right-click the software icon in the lower right corner, and select "Bluetooth Settings". It will automatically search for surrounding Bluetooth devices, and your phone will appear in the list.Uncheck the "Stop this device automatically connecting when within range" checkbox below, otherwise it will prompt that the phone cannot be found. Then click the "Advanced Settings" tab, click "View" below, and add the port number of the bluetooth serial port you wrote down in the second step. In this way, the setting of mrouter is also completed. This concludes the computer setup.
The next step is the work on the mobile phone:
1. Download the unsign version of gnubox and make your own signature.
2. Install signed gnubox. Don't run it yet. Enter the connection settings of your phone and create a new access point named "bt" (which should be the English abbreviation of Bluetooth). Remember here, it must be lowercase "bt"! Then set the data bearing mode to "data call", dial any number you want, and use your username and password as you like. Then go to "Advanced Settings" and change the proxy port inside to 6588.
3. Run the installed gnubox.Follow the steps below: 1. Option->Install->create records 2. Option->Exit 3. Open guubox again, Option->Install->set RAS login script 4. Option->2box Bluetooth->Serial port(Encryption done) 5. Option->debug->bring up IF Complete the fifth step of bring up IF Afterwards, there will be a prompt message on the Bluetooth icon in the lower right corner of the computer. Just click on those messages to confirm. Then you can access the Internet through Bluetooth. When surfing the Internet, you will be prompted to select an access point. Remember to select "bt". Also, if the connection between Bluetooth and the computer is disconnected, just take the fifth step above to bring up IF.
Every time you use it in the future, you only need to plug the Bluetooth adapter into the USB port of the computer (remember not to change to another USB port), then turn on Bluetooth on the phone, and then you can open the software or UCWEB to access the Internet. There is no need to open gnubox. The mrouter3 on the computer must be turned on, otherwise it will not be able to access the Internet.
--------------------------------------------------------------------------------
In addition, let's talk about the Bluetooth adapter
Bluetooth version:
V1.0: Transmission speed: 680--720Kbps
V1 .1: Transmission speed: 748--810Kbps
V1.2: Transmission speed: 748--810Kbps
V2.0: Transmission speed: 1.8--2.1Mbps
Normally speaking, the transmission speed between Bluetooth adapters of 1.2 can reach 94-101K/s (depending on the environment, its transmission rate is 748--810Kbps).
The transmission speed of the 2.0 Bluetooth adapter can reach 230K-269K/s (the transmission rate of 2.0 is 1.8--2.1Mbps)
The above are theoretical speeds. In practice, due to interference, distance consumption, brick wall obstruction, etc., the speed will be lower. For example, mine is 2.0 With my small 6, the transmission is over 200K, but when using ADSL to access the Internet, the picture I posted can already reach over 100K. I used a 6120C to actually measure it, and my ADSL is 2M.
As for everyone who wants to buy a Bluetooth 2.0 adapter, you can look online or at a local electronics mall

Question
Question
Question
Question
As for someone who wants to buy a Bluetooth 2.0 adapter, you can look online or at a local electronics mall.