Make an Android device a real Windows XP system capable of running exe files (built-in instructions, with pictures as proof, no Root required)

Instructions:\Minimum configuration requirements:\CPU 1GHz or above\ROM 520MB or above\Resolution 320*480 or above\Android system version 2.1 or above\Test device:\Coolpad 7295 (Chunlei MAX)\System configuration:\CPU cores: 4 cores (1.2GHz)\Operating system:\Android 4.1.2\RAM:\0.92G (commonly referred to as 1G)\Resolution:\540*960\Operating instructions:\1. Emulator main program (this is the attachment, unzip the package, there is another zipped file inside, unzip that and it will be ready) The first one needs to be installed on the phone like any typical QQ or UC app! The second one, all the unzipped files should be placed on the SD card without creating any folder! Just put them directly!\2. Configuration file (already packaged in the attachment)\3. Disk image (those who have used virtual machines will know, it is equivalent to an already installed operating system image. Initially, I mistakenly thought it was a system installation disk, just use the image attached in this post)\Detailed operation steps:\Step 1: Install the emulator main program (no need to elaborate, it's like a normal Android app as I mentioned above!!)\Step 2: Copy the SDL folder containing the configuration files to the root directory of the phone's internal memory (if the phone does not have internal memory, copy it to the SD card, as mentioned above! I tested by putting it directly on the SD card)\Step 3: (The download address is in the zipped attachment, data size over 400MB, after unzipping over 1.4GB) Rename the downloaded disk image file to c.img and copy it to the SDL folder from Step 2, which is the unzipped stuff you put on the SD card, there's an SDL folder inside, put it in there and rename it properly! (Copy the corresponding image for the system you want)\Step 4: Run the installed emulator main program. If there are no issues, the operating system will start!! English text will appear, click it and the keyboard will appear! Press Enter and the Windows 98 interface will show up. Then just wait!!!!!\Briefly, how to operate after entering the system: Tap the bottom left corner of the touchscreen for keyboard input, Volume+ is the left mouse button, Volume- is the right mouse button, swipe the touchscreen to move the mouse (I tested using touchscreen to control the mouse, it may vary!)\Tools used in the tutorial: Download emulator main program + configuration files (The configuration files are already in the SDL folder, just copy the SDL folder to the root directory of internal memory)