Android phone with low sound
Reprinted from Baidu, may not be universal, please be careful! ! ! ! Contents of this post: Turn up the volume on your phone and headphones respectively. The claw machine is powerless, so go directly to the topic, the picture will be posted later. 1 Enter *#*#3646633#*#* in the dialer and you will enter the engineering mode directly. 2 Click Audio and another interface will pop up. 3 At this time, the second one is the headset sound (headset Mode). The third one is the sound of the claw machine itself (LoudSpeaker) [Let's talk about amplifying the headset sound first] 4. After the headset Mode, the setting interface will pop up, then click the box under type (the box that says Ring) and select FMR. 5 Then move to the bottom two boxes (i.e. the box to the left of set). Enter 254 in the first box and click set. Then enter 159 in the second box and click the set button to exit. ==== Here is the claw machine's own amplified sound. 1 Enter *#*#3646633#*#* on the dialer and you will directly enter the engineering mode. 2 Click Audio and another interface will pop up. 3 The third one is the claw machine's own sound (LoudSpeaker). 4. In the last two boxes, enter 254 points set in the first one and 159 points set in the second one. Press the house key to exit. ### You may be afraid that the earphones (headphones) will be damaged if the sound is too loud. In fact, otherwise, the manufacturer has this upper limit and it will not be damaged. His original value is relatively conservative, so everyone is still worried about opening their ears too much. =Again, this post was originally written by someone else (I don't know if it was original by him), but I typed it word by word with painstaking efforts, and I didn't copy even a single comma, so please respect the fruits of my labor. Reply
Replies (10)
— All replies loaded —